NetBSD 2.0.1 (NIMBUS) #2: Wed Feb 23 21:24:12 EET 2005 root@nimbus.csfi.net:/usr/src/sys/arch/i386/compile/NIMBUS total memory = 2047 MB avail memory = 2000 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (DELL PE 011C ) cpu0 at mainbus0: apid 1 (boot processor) cpu0: Intel Pentium III (686-class), 1396.53 MHz, id 0x6b1 cpu0: features 383fbff cpu0: features 383fbff cpu0: features 383fbff cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 512 KB 32B/line 8-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: calibrating local timer cpu0: apic clock running at 132 MHz cpu0: 16 page colors cpu1 at mainbus0: apid 0 (application processor) cpu1: starting cpu1: Intel Pentium III (686-class), 1396.44 MHz, id 0x6b1 cpu1: features 383fbff cpu1: features 383fbff cpu1: features 383fbff cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu1: L2 cache 512 KB 32B/line 8-way cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type ISA ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 11, 16 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 2 ioapic1 at mainbus0 apid 3 (I/O APIC) ioapic1: pa 0xfec01000, version 11, 16 pins ioapic1: misconfigured as apic 0 ioapic1: remapped to apic 3 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23) pci1 at pchb0 bus 1 pci1: no spaces enabled! pchb1 at pci0 dev 0 function 1 pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01) pchb2 at pci0 dev 0 function 2 pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01) pci2 at pchb2 bus 1 pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ahc0 at pci2 dev 2 function 0: Adaptec aic7899 Ultra160 SCSI adapter ahc0: interrupting at ioapic1 pin 13 (irq 11) ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsibus0 at ahc0: 16 targets, 8 luns per target ahc1 at pci2 dev 2 function 1: Adaptec aic7899 Ultra160 SCSI adapter ahc1: interrupting at ioapic1 pin 14 (irq 10) ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs scsibus1 at ahc1: 16 targets, 8 luns per target ahc2 at pci2 dev 6 function 0: Adaptec 29160 Ultra160 SCSI adapter ahc2: interrupting at ioapic1 pin 12 (irq 7) ahc2: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsibus2 at ahc2: 16 targets, 8 luns per target pchb3 at pci0 dev 0 function 3 pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01) pci3 at pchb3 bus 2 pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok wm0 at pci3 dev 2 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2 wm0: interrupting at ioapic1 pin 0 (irq 5) wm0: 64-bit 66MHz PCI bus wm0: 64 word (6 address bits) MicroWire EEPROM wm0: Ethernet address 00:c0:9f:05:8c:60 makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto vga1 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 15 function 0 pcib0: ServerWorks CSB5 ISA bridge (rev. 0x92) rccide0 at pci0 dev 15 function 1 rccide0: ServerWorks CSB5 IDE Controller (rev. 0x92) rccide0: bus-master DMA support present rccide0: primary channel configured to compatibility mode rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at rccide0 channel 0 rccide0: secondary channel configured to compatibility mode rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at rccide0 channel 1 pchb4 at pci0 dev 15 function 3 pchb4: ServerWorks product 0x0230 (rev. 0x00) isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug 'n Play devices found ioapic1: enabling ioapic0: enabling Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... scsibus2: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 17366 MB, 14384 cyl, 6 head, 412 sec, 512 bytes/sect x 35566478 sectors sd0: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing sd1 at scsibus0 target 1 lun 0: disk fixed sd1: 17366 MB, 14384 cyl, 6 head, 412 sec, 512 bytes/sect x 35566478 sectors sd1: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) ses0 at scsibus0 target 6 lun 0: processor fixed ses0: SAF-TE Compliant Device ses0: async, 8-bit transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs cpu1: CPU 0 running wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)