BSD Installer started
[Fri Jul  7 08:19:29 2006]
DFUI connection on tcp:9999 successfully established
,- opened pty to '/sbin/sysctl -n hw.physmem'
< 4017508352
`- closed pty to '/sbin/sysctl -n hw.physmem'
`/sbin/sysctl -n hw.physmem` returned: 4017508352
,- opened pty to '/sbin/sysctl -n kern.disks'
< da0
`- closed pty to '/sbin/sysctl -n kern.disks'
`/sbin/sysctl -n kern.disks` returned: da0
Surveying Disk: da0 ...
,- opened pty to '/sbin/atacontrol list'
[Fri Jul  7 08:19:31 2006]
< ATA channel 0:
<     Master:      no device present
<     Slave:       no device present
< ATA channel 1:
<     Master: acd0 <SAMSUNG CD-ROM SN-124/N102> ATA/ATAPI revision 0
<     Slave:       no device present
( EOF )
`- closed pty to '/sbin/atacontrol list'
,- opened pty to '/sbin/fdisk da0'
[Fri Jul  7 08:19:32 2006]
< ******* Working on device /dev/da0 *******
< parameters extracted from in-core disklabel are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Figures below won't work with BIOS for partitions not in cyl 1
< parameters to be used for BIOS calculations are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Media sector size is 512
< Warning: BIOS sector numbering starts with sector 1
< Information from DOS bootblock is:
< The data for partition 1 is:
< sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
<     start 63, size 71681967 (35000 Meg), flag 80 (active)
< 	beg: cyl 0/ head 1/ sector 1;
< 	end: cyl 365/ head 254/ sector 63
< The data for partition 2 is:
< <UNUSED>
< The data for partition 3 is:
< <UNUSED>
< The data for partition 4 is:
< <UNUSED>
( EOF )
`- closed pty to '/sbin/fdisk da0'
Disk da0 (da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled): 34.18G: 4462/255/63
,- opened pty to '/sbin/fdisk -s da0'
< /dev/da0: 4462 cyl 255 hd 63 sec
< Part        Start        Size Type Flags
<    1:          63    71681967 0xa5 0x80
( EOF )
`- closed pty to '/sbin/fdisk -s da0'
Surveying Partition: 1: 63,71681967:165/true
,- opened pty to '/sbin/bsdlabel da0s1'
< bsdlabel: /dev/da0s1: No such file or directory
( EOF )
`- closed pty to '/sbin/bsdlabel da0s1'
,- opened pty to '/sbin/ifconfig -l'
< em0 em1 em2 em3 pfsync0 lo0 pflog0
`- closed pty to '/sbin/ifconfig -l'
,- opened pty to '/sbin/ifconfig em0'
< em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
< 	options=b<RXCSUM,TXCSUM,VLAN_MTU>
< 	inet6 fe80::207:e9ff:fe20:992%em0 prefixlen 64 scopeid 0x1 
< 	ether 00:07:e9:20:09:92
< 	media: Ethernet autoselect
< 	status: no carrier
( EOF )
`- closed pty to '/sbin/ifconfig em0'
,- opened pty to '/sbin/ifconfig em1'
< em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
< 	options=b<RXCSUM,TXCSUM,VLAN_MTU>
< 	ether 00:07:e9:20:09:93
< 	media: Ethernet autoselect
< 	status: no carrier
( EOF )
`- closed pty to '/sbin/ifconfig em1'
,- opened pty to '/sbin/ifconfig em2'
< em2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
< 	options=b<RXCSUM,TXCSUM,VLAN_MTU>
< 	inet6 fe80::207:e9ff:fe24:8542%em2 prefixlen 64 scopeid 0x3 
< 	inet 193.65.195.10 netmask 0xffffff00 broadcast 193.65.195.255
< 	ether 00:07:e9:24:85:42
< 	media: Ethernet autoselect (100baseTX <full-duplex>)
< 	status: active
( EOF )
`- closed pty to '/sbin/ifconfig em2'
,- opened pty to '/sbin/ifconfig em3'
< em3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
< 	options=b<RXCSUM,TXCSUM,VLAN_MTU>
< 	ether 00:07:e9:24:85:43
< 	media: Ethernet autoselect
< 	status: no carrier
( EOF )
`- closed pty to '/sbin/ifconfig em3'
,- opened pty to '/sbin/ifconfig pfsync0'
< pfsync0: flags=41<UP,RUNNING> mtu 2020
< 	pfsync: syncdev: lo0 maxupd: 128
( EOF )
`- closed pty to '/sbin/ifconfig pfsync0'
,- opened pty to '/sbin/ifconfig lo0'
< lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
< 	inet6 ::1 prefixlen 128 
< 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 
< 	inet 127.0.0.1 netmask 0xffffff00 
( EOF )
`- closed pty to '/sbin/ifconfig lo0'
,- opened pty to '/sbin/ifconfig pflog0'
< pflog0: flags=100<PROMISC> mtu 33208
( EOF )
`- closed pty to '/sbin/ifconfig pflog0'
'/usr/local/share/dfuibe_lua/pit//.' skipped, it is a directory
'/usr/local/share/dfuibe_lua/pit//..' skipped, it is a directory
UINav.Atom 'pre_install_tasks/welcome' was configured as 'ignore'
couldn't register UINav atom from file '050_welcome.lua'
'100_select_language.lua' skipped, reason: nil
registered UINav atom 'pre_install_tasks/configure_console'
UINav.Atom 'pre_install_tasks/load_kernel_modules' was configured as 'ignore'
couldn't register UINav atom from file '400_load_kernel_modules.lua'
registered UINav atom 'pre_install_tasks/configure_network'
'main.lua' skipped, it is the currently executing script
Flow executing -> pre_install_tasks/configure_console (Configure Console)
[Fri Jul  7 08:19:34 2006]
Flow executing -> pre_install_tasks/configure_network (Configure your Network)
'/usr/local/share/dfuibe_lua//.' skipped, it is a directory
'/usr/local/share/dfuibe_lua//..' skipped, it is a directory
registered UINav atom 'main/install_os'
UINav.Atom 'main/configure_installed_system' was configured as 'ignore'
couldn't register UINav atom from file '400_configure.lua'
UINav.Atom 'main/upgrade_installed_system' was configured as 'ignore'
couldn't register UINav atom from file '600_upgrade.lua'
UINav.Atom 'main/set_up_netboot' was configured as 'ignore'
couldn't register UINav atom from file '800_netboot.lua'
registered UINav atom 'main/reboot'
'/usr/local/share/dfuibe_lua//conf' skipped, it is a directory
'/usr/local/share/dfuibe_lua//configure' skipped, it is a directory
'/usr/local/share/dfuibe_lua//install' skipped, it is a directory
'/usr/local/share/dfuibe_lua//lib' skipped, it is a directory
'main.lua' skipped, it is the currently executing script
'/usr/local/share/dfuibe_lua//netboot' skipped, it is a directory
'/usr/local/share/dfuibe_lua//pit' skipped, it is a directory
'/usr/local/share/dfuibe_lua//upgrade' skipped, it is a directory
[Fri Jul  7 08:19:35 2006]
Menu.Item Selected -> main/install_os (Install pfSense)
'/usr/local/share/dfuibe_lua/install//.' skipped, it is a directory
'/usr/local/share/dfuibe_lua/install//..' skipped, it is a directory
UINav.Atom 'main/install/welcome' was configured as 'ignore'
couldn't register UINav atom from file '100_welcome.lua'
registered UINav atom 'main/install/select_disk'
registered UINav atom 'main/install/format_disk'
registered UINav atom 'main/install/partition_disk'
registered UINav atom 'main/install/install_bootblocks'
registered UINav atom 'main/install/select_part'
registered UINav atom 'main/install/select_subparts'
UINav.Atom 'main/install/warn_omitted_subpartitions' was configured as 'ignore'
couldn't register UINav atom from file '405_warn_omitted_subparts.lua'
registered UINav atom 'main/install/create_subparts'
UINav.Atom 'main/install/select_additional_filesystems' was configured as 'ignore'
couldn't register UINav atom from file '410_select_additional_filesystems.lua'
registered UINav atom 'main/install/preselect_packages'
UINav.Atom 'main/install/select_packages' was configured as 'ignore'
couldn't register UINav atom from file '450_select_packages.lua'
UINav.Atom 'main/install/confirm_install_os' was configured as 'ignore'
couldn't register UINav atom from file '490_confirm_install_os.lua'
registered UINav atom 'main/install/install_os'
registered UINav atom 'main/install/pfsense_after_install'
UINav.Atom 'main/install/finished' was configured as 'ignore'
couldn't register UINav atom from file '800_finished.lua'
registered UINav atom 'main/install/reboot'
'main.lua' skipped, it is the currently executing script
Flow executing -> main/install/select_disk (Select Disk)
[Fri Jul  7 08:19:36 2006]
Flow executing -> main/install/format_disk (Format Disk)
[Fri Jul  7 08:19:39 2006]
,-<<< Executing `cd /dev && /bin/test -c da0 || /bin/sh MAKEDEV da0'
`->>> Exit status: 0
,-<<< Executing `/sbin/fdisk -I da0'
| ******* Working on device /dev/da0 *******
| fdisk: Geom not found: "da0"
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'g c4462 h255 s63' >/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 1 165 63 71681967' >>/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 2 0 0 0' >>/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 3 0 0 0' >>/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 4 0 0 0' >>/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'a 1' >>/tmp/format.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/cat /tmp/format.fdisk'
| g c4462 h255 s63
| p 1 165 63 71681967
| p 2 0 0 0
| p 3 0 0 0
| p 4 0 0 0
| a 1
`->>> Exit status: 0
,-<<< Executing `/sbin/fdisk -v -f /tmp/format.fdisk da0'
| ******* Working on device /dev/da0 *******
| fdisk: WARNING line 1: number of cylinders (4462) may be out-of-range
|     (must be within 1-1024 for normal BIOS operation, unless the entire disk
|     is dedicated to FreeBSD)
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Information from DOS bootblock is:
| 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| 2: <UNUSED>
| 3: <UNUSED>
| 4: <UNUSED>
| fdisk: Geom not found: "da0"
`->>> Exit status: 0
,-<<< Executing `/sbin/fdisk da0'
| ******* Working on device /dev/da0 *******
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Media sector size is 512
| Warning: BIOS sector numbering starts with sector 1
| Information from DOS bootblock is:
| The data for partition 1 is:
| sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| The data for partition 2 is:
| <UNUSED>
| The data for partition 3 is:
| <UNUSED>
| The data for partition 4 is:
| <UNUSED>
`->>> Exit status: 0
,-<<< Executing `/usr/bin/yes | /sbin/fdisk -B da0'
| ******* Working on device /dev/da0 *******
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Media sector size is 512
| Warning: BIOS sector numbering starts with sector 1
| Information from DOS bootblock is:
| The data for partition 1 is:
| sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| The data for partition 2 is:
| <UNUSED>
| The data for partition 3 is:
| <UNUSED>
| The data for partition 4 is:
| <UNUSED>
| Do you want to change the boot code? [n] 
| We haven't changed the partition table yet.  This is your last chance.
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Information from DOS bootblock is:
| 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| 2: <UNUSED>
| 3: <UNUSED>
| 4: <UNUSED>
| Should we write new partition table? [n] fdisk: Geom not found: "da0"
| yes: stdout: Broken pipe
`->>> Exit status: 0
,- opened pty to '/sbin/sysctl -n hw.physmem'
< 4017508352
`- closed pty to '/sbin/sysctl -n hw.physmem'
`/sbin/sysctl -n hw.physmem` returned: 4017508352
,- opened pty to '/sbin/sysctl -n kern.disks'
< da0
`- closed pty to '/sbin/sysctl -n kern.disks'
`/sbin/sysctl -n kern.disks` returned: da0
Surveying Disk: da0 ...
,- opened pty to '/sbin/atacontrol list'
< ATA channel 0:
<     Master:      no device present
<     Slave:       no device present
< ATA channel 1:
<     Master: acd0 <SAMSUNG CD-ROM SN-124/N102> ATA/ATAPI revision 0
<     Slave:       no device present
( EOF )
`- closed pty to '/sbin/atacontrol list'
,- opened pty to '/sbin/fdisk da0'
< ******* Working on device /dev/da0 *******
< parameters extracted from in-core disklabel are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Figures below won't work with BIOS for partitions not in cyl 1
< parameters to be used for BIOS calculations are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Media sector size is 512
< Warning: BIOS sector numbering starts with sector 1
< Information from DOS bootblock is:
< The data for partition 1 is:
< sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
<     start 63, size 71681967 (35000 Meg), flag 80 (active)
< 	beg: cyl 0/ head 1/ sector 1;
< 	end: cyl 365/ head 254/ sector 63
< The data for partition 2 is:
< <UNUSED>
< The data for partition 3 is:
< <UNUSED>
< The data for partition 4 is:
< <UNUSED>
( EOF )
`- closed pty to '/sbin/fdisk da0'
Disk da0 (da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled): 34.18G: 4462/255/63
,- opened pty to '/sbin/fdisk -s da0'
< /dev/da0: 4462 cyl 255 hd 63 sec
< Part        Start        Size Type Flags
<    1:          63    71681967 0xa5 0x80
( EOF )
`- closed pty to '/sbin/fdisk -s da0'
Surveying Partition: 1: 63,71681967:165/true
,- opened pty to '/sbin/bsdlabel da0s1'
< bsdlabel: /dev/da0s1: No such file or directory
( EOF )
`- closed pty to '/sbin/bsdlabel da0s1'
Flow executing -> main/install/partition_disk (Partition Disk)
,- opened pty to '/sbin/mount'
< /dev/iso9660/pfSense on / (cd9660, local, read-only)
< devfs on /dev (devfs, local)
< /dev/md0.uzip on /usr (ufs, local, read-only)
< /dev/md1 on /tmp (ufs, local)
< /dev/md2 on /var (ufs, local, noatime)
< /dev/md3 on /etc (ufs, local, noatime)
< /dev/md4 on /usr/local/etc (ufs, local, noatime)
< /dev/md5 on /root (ufs, local, noatime)
< /dev/fd0 on /tmp/mnt/cf (msdosfs, local)
< /dev/md6 on /conf (ufs, local)
< /conf on /cf/conf (nullfs, local)
< devfs on /var/dhcpd/dev (devfs, local)
< /dev/md7 on /var/db/rrd (ufs, local, soft-updates)
( EOF )
`- closed pty to '/sbin/mount'
[Fri Jul  7 08:19:42 2006]
,-<<< Executing `cd /dev && /bin/test -c da0 || /bin/sh MAKEDEV da0'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'g c4462 h255 s63' >/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 1 165 63 71681967' >>/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 2 0 0 0' >>/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 3 0 0 0' >>/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'p 4 0 0 0' >>/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/echo 'a 1' >>/tmp/new.fdisk'
`->>> Exit status: 0
,-<<< Executing `/bin/cat /tmp/new.fdisk'
| g c4462 h255 s63
| p 1 165 63 71681967
| p 2 0 0 0
[Fri Jul  7 08:19:43 2006]
| p 3 0 0 0
| p 4 0 0 0
| a 1
`->>> Exit status: 0
,-<<< Executing `/sbin/fdisk -v -f /tmp/new.fdisk da0'
| ******* Working on device /dev/da0 *******
| fdisk: WARNING line 1: number of cylinders (4462) may be out-of-range
|     (must be within 1-1024 for normal BIOS operation, unless the entire disk
|     is dedicated to FreeBSD)
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Information from DOS bootblock is:
| 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| 2: <UNUSED>
| 3: <UNUSED>
| 4: <UNUSED>
| fdisk: Geom not found: "da0"
`->>> Exit status: 0
,-<<< Executing `/sbin/fdisk da0'
| ******* Working on device /dev/da0 *******
| parameters extracted from in-core disklabel are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Figures below won't work with BIOS for partitions not in cyl 1
| parameters to be used for BIOS calculations are:
| cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
| 
| Media sector size is 512
| Warning: BIOS sector numbering starts with sector 1
| Information from DOS bootblock is:
| The data for partition 1 is:
| sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
|     start 63, size 71681967 (35000 Meg), flag 80 (active)
| 	beg: cyl 0/ head 1/ sector 1;
| 	end: cyl 365/ head 254/ sector 63
| The data for partition 2 is:
| <UNUSED>
| The data for partition 3 is:
| <UNUSED>
| The data for partition 4 is:
| <UNUSED>
`->>> Exit status: 0
,- opened pty to '/sbin/sysctl -n hw.physmem'
< 4017508352
`- closed pty to '/sbin/sysctl -n hw.physmem'
`/sbin/sysctl -n hw.physmem` returned: 4017508352
,- opened pty to '/sbin/sysctl -n kern.disks'
< da0
`- closed pty to '/sbin/sysctl -n kern.disks'
`/sbin/sysctl -n kern.disks` returned: da0
Surveying Disk: da0 ...
,- opened pty to '/sbin/atacontrol list'
< ATA channel 0:
<     Master:      no device present
<     Slave:       no device present
< ATA channel 1:
<     Master: acd0 <SAMSUNG CD-ROM SN-124/N102> ATA/ATAPI revision 0
<     Slave:       no device present
( EOF )
`- closed pty to '/sbin/atacontrol list'
,- opened pty to '/sbin/fdisk da0'
< ******* Working on device /dev/da0 *******
< parameters extracted from in-core disklabel are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Figures below won't work with BIOS for partitions not in cyl 1
< parameters to be used for BIOS calculations are:
< cylinders=4462 heads=255 sectors/track=63 (16065 blks/cyl)
< 
< Media sector size is 512
< Warning: BIOS sector numbering starts with sector 1
< Information from DOS bootblock is:
< The data for partition 1 is:
< sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
<     start 63, size 71681967 (35000 Meg), flag 80 (active)
< 	beg: cyl 0/ head 1/ sector 1;
< 	end: cyl 365/ head 254/ sector 63
< The data for partition 2 is:
< <UNUSED>
< The data for partition 3 is:
< <UNUSED>
< The data for partition 4 is:
< <UNUSED>
( EOF )
`- closed pty to '/sbin/fdisk da0'
Disk da0 (da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled): 34.18G: 4462/255/63
,- opened pty to '/sbin/fdisk -s da0'
< /dev/da0: 4462 cyl 255 hd 63 sec
< Part        Start        Size Type Flags
<    1:          63    71681967 0xa5 0x80
( EOF )
`- closed pty to '/sbin/fdisk -s da0'
Surveying Partition: 1: 63,71681967:165/true
,- opened pty to '/sbin/bsdlabel da0s1'
< bsdlabel: /dev/da0s1: No such file or directory
( EOF )
`- closed pty to '/sbin/bsdlabel da0s1'
Flow executing -> main/install/install_bootblocks (Install Bootblocks)
[Fri Jul  7 08:19:45 2006]
,-<<< Executing `/usr/sbin/boot0cfg -B -o packet -s 1 da0'
`->>> Exit status: 0
,-<<< Executing `/usr/sbin/boot0cfg -v da0'
| #   flag     start chs   type       end chs       offset         size
| 1   0x80      0:  1: 1   0xa5    365:254:63           63     71681967
| 
| version=1.0  drive=0x80  mask=0xf  ticks=182
| options=packet,update,nosetdrv
| default_selection=F1 (Slice 1)
`->>> Exit status: 0
Flow executing -> main/install/select_part (Select Partition)
[Fri Jul  7 08:19:46 2006]
,- opened pty to '/sbin/mount'
< /dev/iso9660/pfSense on / (cd9660, local, read-only)
< devfs on /dev (devfs, local)
< /dev/md0.uzip on /usr (ufs, local, read-only)
< /dev/md1 on /tmp (ufs, local)
< /dev/md2 on /var (ufs, local, noatime)
< /dev/md3 on /etc (ufs, local, noatime)
< /dev/md4 on /usr/local/etc (ufs, local, noatime)
< /dev/md5 on /root (ufs, local, noatime)
< /dev/fd0 on /tmp/mnt/cf (msdosfs, local)
< /dev/md6 on /conf (ufs, local)
< /conf on /cf/conf (nullfs, local)
< devfs on /var/dhcpd/dev (devfs, local)
< /dev/md7 on /var/db/rrd (ufs, local, soft-updates)
( EOF )
`- closed pty to '/sbin/mount'
,- opened pty to '/usr/sbin/pstat -s -k'
< Device          1K-blocks     Used    Avail Capacity
( EOF )
`- closed pty to '/usr/sbin/pstat -s -k'
[Fri Jul  7 08:19:47 2006]
,-<<< Executing `cd /dev && /bin/test -c da0s1 || /bin/sh MAKEDEV da0s1'
| MAKEDEV: Can't open MAKEDEV: No such file or directory
`->>> Exit status: 2